Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 101 / 234

Using the [Maintenance] Menu
99
Clean Maint Unit
Move the maintenance unit to a position where cleaning can be carried out. If the message
prompting you to provide regular maintenance appears, clean the Maintenance Unit.
Auto Head Maint.
The print head nozzles clean automatically. If the message prompting you to provide regular
maintenance appears, clean the print head.
Clean Internals
The internal compartments clean automatically. Clean the interior if you do not use the
machine for a long time.
Fan Filter
Reset the count of the number of prints after replacing the filter. See page 170 " Replacing
Filters ".
Fan Speed
You can adjust the fan speed if you are bothered with the fan noise. See page 171 " Adjusting
the Fan Speed ".
Nozzle Check
Follow the procedure below to check whether the print head nozzles are clogged up or not by
printing a nozzle check test pattern. To maintain print quality, we recommend checking a nozzle
before printing if the machine has not printed anything for a certain interval of time, such as for
the first time in the day or after a rest period.
1.
Load the fabric in the tray.
2.
Press the [ /Menu] key.
3.
Press the [ ] or [ /Menu] key to display [Maintenance], and then press the
[#Enter] key.
4.
Press the [ ] or [ /Menu] key to display [Nozzle Check], and then press the
[#Enter]
5.
Press the [#Enter] key.
6.
Press the [Start] key.
A test pattern is printed.
Wait while "Maintenance in process..." is displayed.
7.
Press the [Escape] key until the top screen appears.
Press # to
print pattern
<Maintenance>
Nozzle Check
<Menu>
Maintenance