Roland Juno-Stage, Руководство пользователя

Страница: 161 / 256

161
Troubleshooting
Q
Songs won’t play
A
This may be due to the following reasons.
• Could a “?” mark be shown by the song in the play list?
Songs (audio files) whose sample rate is other than 44.1 kHz
cannot be played by the JUNO-STAGE.
• The file type of the song is not one of the file types that the
JUNO-STAGE can play.
• It may be that the song data is damaged.
• Songs cannot be played if you directly add/delete/modify the
song data in the PLAYLIST folder without using Playlist Editor.
Q
Can’t hear the playback sound
A
Check the following point.
• VOLUME knob setting
• Value for “PLAYER LEVEL” that appears when you press LEVEL
[ ] [ ] (p. 69).
• SONG LEVEL EDIT screen settings (p. 71)
• Minus-one setting (p. 73, p. 154)
• Could the system setting “Song/Click Output Mode” be set to
“SONG” (p. 151)?
If this is set to “SONG,” the song will not be output from the
OUTPUT L/R jacks. If you want the song to be output from the
OUTPUT L/R jacks, set this to “CLICK.”
Q
No Sound from connected MIDI device.
A
Check the following points.
• Is the instrument set to transmit MIDI messages?
•
In Patch Mode
Kbd Patch Rx/Tx Channel parameter (p. 150)
•
In Performance Mode
KBD switch (p. 134).
MIDI messages are not transmitted for parts whose keyboard
switch is turned off.
Q
Exclusive messages are not received.
A
Check the following points.
• Is the instrument set to receive Exclusive messages?
Set the Receive Exclusive parameter to “ON” (p. 151).
• Does the Device ID number of the transmitting device match the
Device ID number of the JUNO-STAGE?
Check the Device ID parameter (p. 150).
Q
The JUNO-STAGE’s rhythm set does not sound when an
external sequencer or MIDI keyboard is connected to the
MIDI IN connector.
A
Check to make sure that the MIDI Transmit channel of the external
MIDI device and the JUNO-STAGE’s MIDI Receive channel are
matched. The MIDI Receive channel used by the JUNO-STAGE in
Patch mode is set with the Kbd Patch RX/TX Channel parameter.
Rhythm Set performance data is generally received on MIDI
Channel 10.
Q
When using sequencing software, operating the knobs or
other controls does not affect the sound.
A
For some sequencing programs, System Exclusive messages are
not transmitted by the Thru function. If you are using such
sequencer software and want to record system exclusive
messages, turn on the following parameters.
•
In Patch Mode
Local Switch parameter (p. 150).
•
In Performance Mode
KBD switch (p. 134).
Q
When the Bend Range for a Patch is increased (48), the
pitch does not rise sufficiently, even when a MIDI Pitch
Bend message is received.
A
While Patch Bend Ranges can be set anywhere between 0 and
48, when certain Waves in which the pitch is raised (in the +
direction) are used, the pitch may stop rising at a fixed point,
rather than continuing to go up. Although a value of 12 is
ensured for the upper limit of raised pitches, use caution when
setting the Bend Range above this figure.
Q
Mic sound is not output/is too weak.
A
Check the following points.
• Is the mic cable connected correctly?
Check the connection.
• Could you have connected a condenser mic?
If you’re using a condenser mic, you’ll need to provide phantom
power.
Turn Phantom Power “ON” (p. 154).
• The mic level may have been lowered.
Could the top panel MIC VOLUME knob be turned down?
Q
The volume level of the instrument connected to JUNO-
STAGE is too low.
A
Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
Q
USB memory is not detected.
The files are not shown.
A
Check the format of your USB memory.
The JUNO-STAGE can use USB memory that has been formatted
as FAT. If your USB memory was formatted using any other
method, please re-format it using FAT.
Q
Can’t back up to USB memory
A
Check the following points.
• Could the USB memory be write protected?
• Is there sufficient free space on the USB memory?
Issues Related to MIDI and External Devices
Issues related to USB memory
JUNO-STAGE_e.book 161 ページ ２００８年１０月１７日 金曜日 午後１２時２７分