![Roland Juno-Stage Скачать руководство пользователя страница 154](http://html1.mh-extra.com/html/roland/juno-stage/juno-stage_user-manual_1480024154.webp)
154
Chapter 11. Other Settings
Here’s how to make settings for the MIC INPUT jack, and specify the reverb that will be applied to the connected mic.
1.
Press [MENU].
The Top Menu window will appear.
2.
Use [
] [
] to select “2. Mic Input Setting,” and press [ENTER].
The MIC INPUT SETTING screen will appear.
3.
Use the cursor buttons to select the parameter that you want to
change.
4.
Use the VALUE dial or [DEC] [INC] to change the value.
If you want to save the changes you made, press [7 (WRITE)]. If
you want to exit without saving, press [EXIT] or [6 (EXIT)].
You can also access the MIC INPUT SETTING screen by holding
down [SHIFT] and pressing MIC IN [REVERB].
Parts for which this setting is ON will be muted.
fig.disp-
1.
Press [MENU].
The Top Menu window will appear.
2.
Use [
] [
] to select “3. Minus One Setting,” and press
[ENTER].
The MINUS ONE SETTING screen will appear.
3.
Use the cursor buttons to select to the part that you want to
change.
4.
Use the VALUE dial or [DEC] [INC] to turn the setting on or off.
You can also use the following function buttons to turn the setting
on/off.
• Pressing [2 (1 ON)] will turn part 1 on.
• Pressing [3 (3-4 ON)] will turn part 3 and part 4 on.
• Pressing [4 (ALL OFF)] will turn all parts off.
If you want to save the changes you made, press [7 (WRITE)]. If
you want to exit without saving, press [EXIT] or [6 (EXIT)].
You can also access the MINUS ONE SETTING screen by
holding down [SHIFT] and pressing [C.CANCEL/MINUS ONE].
Detailed Settings for the MIC INPUT (MIC Input Setting)
Parameter
Value
Explanation
Phantom Power
OFF, ON
Turn this ON if you want to use phantom power.
* This setting cannot be saved. When the power is turned on, this will be set to
“OFF.”
Mic-In Reverb Level
0–127
Amount of reverb that is applied to the sound of the mic.
Mic-In Reverb Type
ROOM1, ROOM2,
STAGE1, STAGE2,
HALL1, HALL2, DELAY,
PAN-DELAY
Type of reverb/delay
ROOM1:
Short, high-density reflections
ROOM2:
Short, low-density reflections
STAGE1:
Greater amount of late reverberation
STAGE2:
Stronger early reflections
HALL1:
Clear-sounding reverberation
HALL2:
Rich-sounding reverberation
DELAY:
Conventional delay
PAN-DELAY:
Delay that moves the reflections between left and right
Mic-In Reverb Time
0–127
Length of the reverberation (when Mic-In Reverb Type is ROOM1–HALL2)
Delay time of the delay (when Mic-In Reverb Type is DELAY or PAN-DELAY)
Mic Mode
ALL, VOCODER ONLY
Specifies whether the sound from the mic will be output at all times (ALL) or only if
MFX (p. 84) is set to “79:VOCODER” (VOCODER ONLY).
Detailed Settings for Minus-One (Minus One Setting)
JUNO-STAGE_e.book 154 ページ 2008年10月17日 金曜日 午後12時27分
Содержание Juno-Stage
