Roland Juno-Stage, Руководство пользователя

Страница: 102 / 256

102
Chapter 8. Detailed Editing for Patches
KEY RANGE
You can use the note number to control the way each Tone is played.
fig.TMT-K.e
VELOCITY RANGE
You can use the force with which keys are played to control the way each Tone is played.
fig.TMT-V.e
When using the Matrix Control to have different tones played, set the lowest value (Lower) and highest value (Upper) of the value of the MIDI
message used.
Instead of using Velocity, you can also have tones substituted using the Matrix Control. However, the keyboard velocity and the Matrix Control
cannot be used simultaneously to make different tones to sound. When using the Matrix Control to switch tones, set the Tone Mix Velo Control
parameter to “OFF.”
Parameter Value Explanation
Key Fade Lower 0–127
Determines what will happen to the tone’s level when a note that’s lower than Key Range Lower
is played.
If you don’t want the tone to sound at all, set this parameter to “0.”
Key Range Lower
C - –(Upper) Specifies the lowest note that the tone will sound for each tone.
Key Range Upper
(Lower)–G9 Specifies the highest note that the tone will sound for each tone.
Key Fade Upper 0–127
Determines what will happen to the tone’s level when a note that’s higher than Key Range
Upper is played.
If you don’t want the tone to sound at all, set this parameter to “0.”
Parameter Value Explanation
Tone Mix Velo Control
OFF, ON,
RANDOM,
CYCLE
Determines whether a different tone is played (ON) or not (OFF) depending on the force with
which the key is played (velocity).
RANDOM: The patch’s constituent tones will sound randomly, regardless of any Velocity
messages.
CYCLE: The patch’s constituent tones will sound consecutively, regardless of any Velocity
messages.
Control Switch OFF, ON Use the Matrix Control (p. 110) to enable (ON), or disable (OFF) sounding of different tones.
Velo Fade Lower 0–127
Determines what will happen to the tone’s level when the tone is played at a velocity lower
than Velo Range Lower.
If you don’t want the tone to sound at all, set this parameter to “0.”
Velo Range Lower 1–(Upper) Specifies the lowest velocity at which the tone will sound.
Velo Range Upper (Lower)–127 Specifies the highest velocity at which the tone will sound.
Velo Fade Upper
0–127
Determines what will happen to the tone’s level when the tone is played at a velocity greater
than Velo Range Upper.
If you don’t want the tone to sound at all, set this parameter to “0.”
Key Range Lower Key Range Upper
Key Fade Lower
Key Fade Upper
Level
The tone sounded
in the lower range The tone sounded
in the upper range
Pitch
Velo Range Lower Velo Range Upper
Velo Fade Lower Velo Fade Upper
Level
The tone sounded
when you play softly The tone sounded
when you play strongly
Velocity
JUNO-STAGE_e.book 102 ページ ２００８年１０月１７日 金曜日 午後１２時２７分