
220
MIDI Implementation
■
Channel Mode Messages
*
Not received in Performance mode when the Receive Switch parameter (PERFORM/
MIDI) is OFF.
●
All Sounds Off (Controller number 120)
Status
2nd byte
3rd byte
BnH
78H
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
When this message is received, all notes currently sounding on the corresponding
channel will be turned off.
●
Reset All Controllers (Controller number 121)
Status
2nd byte
3rd byte
BnH
79H
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
When this message is received, the following controllers will be set to their reset values.
Controller
Reset value
Pitch Bend Change
+/-0 (center)
Polyphonic Key Pressure
0 (off)
Channel Pressure
0 (off)
Modulation
0 (off)
Breath Type
0 (min)
Expression
127 (max)
However the controller will be at minimum.
Hold 1
0 (off)
Sostenuto
0 (off)
Soft
0 (off)
Hold 2
0 (off)
RPN
unset; previously set data will not change
NRPN
unset; previously set data will not change
●
All Notes Off (Controller number 123)
Status
2nd byte
3rd byte
BnH
7BH
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
When All Notes Off is received, all notes on the corresponding channel will be turned
off. However, if Hold 1 or Sostenuto is ON, the sound will be continued until these are
turned off.
●
OMNI OFF (Controller number 124)
Status
2nd byte
3rd byte
BnH
7CH
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received.
●
OMNI ON (Controller number 125)
Status
2nd byte
3rd byte
BnH
7DH
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received. OMNI ON
will not be turned on.
●
MONO (Controller number 126)
Status
2nd byte
3rd byte
BnH
7EH
mmH
n = MIDI channel number:
0H - FH (ch.1 - 16)
mm = mono number:
00H - 10H (0 - 16)
*
The same processing will be carried out as when All Notes Off is received.
*
In Performance mode, the Part Mono/Poly parameter (PERFORM/PART VIEW/KEY
MOD) will change.
●
POLY (Controller number 127)
Status
2nd byte
3rd byte
BnH
7FH
00H
n = MIDI channel number: 0H - FH (ch.1 - 16)
*
The same processing will be carried out as when All Notes Off is received.
*
In Performance mode, the Part Mono/Poly parameter (PERFORM/PART VIEW/KEY
MOD) will change.
■
System Realtime Message
●
Timing Clock
Status
F8H
*
Received when Sync Mode parameter (SYSTEM/TEMPO/SYNC) is set to SLAVE-MIDI.
●
Start
Status
FAH
*
Received when Sync Mode parameter (SYSTEM/TEMPO/SYNC) is set to SLAVE-MIDI
or REMOTE.
●
Continue
Status
FBH
*
Received when Sync Mode parameter (SYSTEM/TEMPO/SYNC) is set to SLAVE-MIDI
or REMOTE.
●
Stop
Status
FCH
*
Received when Sync Mode parameter (SYSTEM/TEMPO/SYNC) is set to SLAVE-MIDI
or REMOTE.
●
Active Sensing
Status
FEH
*
When Active Sensing is received, the unit will begin monitoring the intervals of all
further messages. While monitoring, if the interval between messages exceeds 420 ms,
the same processing will be carried out as when All Sounds Off, All Notes Off and Reset
All Controllers are received, and message interval monitoring will be halted.
JUNO-STAGE_e.book 220 ページ 2008年10月17日 金曜日 午後12時27分
Содержание Juno-Stage
