Roland Juno-Stage, Руководство пользователя

Страница: 124 / 256

124
Chapter 9. Detailed Settings for a Rhythm Set
GENERAL
CONTROL
RECEIVE
Functions of Rhythm Set Parameters
Settings Common to the Entire Rhythm Set
Parameter Value Explanation
Rhythm Level
0–127 Volume of the rhythm set
Rhythm Tone Name
You can assign a name of up to 12 characters to the rhythm tone.
Press [ ] [ ] to move the cursor, and use the VALUE dial or [DEC] [INC] to select characters.
Parameter Value Explanation
Assign Type
MULTI, SINGLE
Sets the way sounds are played when the same key is pressed a number of times.
MULTI: Layer the sound of the same keys. Even with continuous sounds where the sound plays
for an extended time, such as with crash cymbals, the sounds are layered, without previously
played sounds being eliminated.
SINGLE: Only one sound can be played at a time when the same key is pressed. With
continuous sounds where the sound plays for an extended time, the previous sound is stopped
when the following sound is played.
Mute Group
OFF, 1–31
The Mute Group function allows you to designate two or more rhythm tones that are not allowed
to sound simultaneously.
On an actual acoustic drum set, an open hi-hat and a closed hi-hat sound can never occur
simultaneously. To reproduce the reality of this situation, you can set up a Mute Group. Up to
31 Mute Groups can be used. rhythm tones that are not belong to any such group should be
set to “OFF.”
Tone Env Mode
NO-SUS,
SUSTAIN
When a loop waveform (p. 123) is selected, the sound will normally continue as long as the key is
pressed. If you want the sound to decay naturally even if the key remains pressed, set this to “NO-SUS.”
* If a one-shot type wave (p. 123) is selected, it will not sustain even if this parameter is set to
“SUSTAIN.”
Tone Pitch Bend Range
0–48
Amount of pitch change in semitones (4 octaves) that will occur when the Pitch Bend Lever is moved
The amount of change when the lever is tilted is set to the same value for both left and right
sides.
One Shot Mode OFF, ON
ON: The sound will play back until the end of the waveform (or the end of the envelope, whichever
comes first).
Relative Level -64–+63
Adjusts the volume of the rhythm tone.
This parameter is set by the system exclusive message Key Based Controller. Normally, you can
leave it set to 0.
If the rhythm tone level is set to 127, the volume cannot be raised any farther.
Parameter Value Explanation
Tone Receive Expression OFF, ON For each rhythm tone, specify whether MIDI Expression messages will be received (ON), or not (OFF).
Tone Receive Hold-1 OFF, ON
For each rhythm tone, specify whether MIDI Hold-1 messages will be received (ON), or not (OFF).
* If “NO-SUS” is selected for Env Mode parameter, this setting will have no effect.
Tone Receive Pan Mode
CONTINUOUS,
KEY-ON
For each rhythm tone, specify how pan messages will be received.
CONTINUOUS: Whenever Pan messages are received, the stereo position of the tone will be
changed.
KEY-ON: The pan of the tone will be changed only when the next note is played. If a pan
message is received while a note is sounding, the panning will not change until the next key is
pressed.
* The channels cannot be set so as not to receive Pan messages.
JUNO-STAGE_e.book 124 ページ ２００８年１０月１７日 金曜日 午後１２時２７分