manualshive.com logo in svg

Rohde & Schwarz CMW-KE100, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz CMW-KE100 Скачать руководство пользователя страница 489

CDMA2000 Signaling

R&S

®

CMW-KM8xx/-KS8xx

489

User Manual 1173.9511.02 ─ 12

Table 4-15: Radio Interface Problems

Text

Description

Radio interface resource shortage

There is no channel available or there is radio congestion at
this time.

Radio interface incompatibility

The MS for an MS-based SME is operating in a mode that
does not support SMS at this time.

Other radio interface problem

A radio interface problem to an MS-based SME other than
described above.

Table 4-16: General Problems

Text

Description

Encoding problem

The size of a parameter or field is not what is expected.

SMS origination denied

The originating MIN is not recognized, the originating address
is not allowed for the originating MIN, the ESN does not match
the originating MIN, the origination is not authorized, the origi-
nating address is not recognized, etc.

SMS termination denied

The destination is not authorized to receive the SMS message,
the MC refused the message, the destination SME refused the
message, the destination is not authorized for a required sup-
plementary service, etc.

Supplementary service not supported

The originating supplementary service is not known or suppor-
ted, the sender is not authorized for an originating supplemen-
tary service, etc.

SMS not supported

SMS is not supported by an addressed functional entity.

Missing expected parameter

An optional parameter that is required for a particular function.

Missing mandatory parameter

A parameter is missing that is mandatory for a particular mes-
sage.

Unrecognized parameter value

A known parameter has a unknown or unsupported value.

Unexpected parameter value

A known parameter has a known, but unexpected value.

User data size error

The User Data size is too large for access technology, trans-
port network, or call mode, etc. The User Data size is not what
is expected for the indicated teleservice.

Other general problems

Other general problems.

Table 4-17: R&S

 

CMW specific codes

Text

Incompatible call configuration

Sending SMS aborted

ACK sequence mismatch

Unknown send error

SMS send confirmation timeout

Acknowledgment timeout

General Description

深圳德标仪器 

135-1095-0799

Содержание CMW-KE100











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды