System menu
F X - 4 0
15.3 DATE, TIME, CALENDAR, SYSTEM TIME
This Set-up menu allows you to set the time of day and the
date. The menu also includes a calendar function covering the
years 2000 … 2099. A further timer shows the system time
(power-on time), and therefore doubles as an operating hours
timer, and also as a run-time display for the battery in use.
34
Calendar
for the years 2000 to 2099. Press
the arrow buttons to leaf through the calen-
dar forward or back.
System time (operating
hours timer):
shows the
power-on time which has
elapsed since the last time
the timer was reset. The
timer can be reset by pres-
sing on the System time field.
Setting the date:
Press the buttons
“Year”, “Month” and
“Day” in turn and set
the current date using
the “+/-” buttons.
Setting the time of
day:
Press the buttons
“Hour”, “Minute” and
“Second” in turn and
set the current time
using the “+/-” but-
tons.
The System time display also appears in the
bottom left-hand corner of the Start display.
The time display also appears at the bot-
tom right-hand corner of the Start display.
15.4 USER NAME, USER NUMBER, SECURITY MODE
Input menu for user name, user number (PIN) and security
mode.
User name
If you touch the User name field, a keypad appears on the
screen so that you can enter the name.
The name can be entered in capitals or lower-case letters; the
Shift key switches between capitals and lower-case. The user
name can be up to 32 letters long.
The keypad is operated in exactly the same way as that of a
PC, and is self-explanatory.
User ID
If you press the User ID field, a keypad appears on the screen
so that you can enter the user number (PIN). When entering
the PIN please note that the software differentiates between
space characters (Return), numbers, special symbols and also
capital and lower-case letters.
The user number protects the transmitter from unauthorised
changes to the user name or denies access to the transmitter
programming system, according to the security mode you
select.
If you wish to switch off the user number completely, simply
enter the number combination
“0000”
(4 x zero); this is also the
factory default transmitter setting.
We recommend that you enter a user ID and a code number to
guard against theft. If you forget your user number, the trans-
mitter must be returned to the robbe Service Centre; please
send proof of ownership if you have to do this.
Security mode
Touching the Security mode input field switches between
User
ID
and
System
. Depending on the security mode you select,
entering a personal identification number (PIN) provides pro-
tection against the following:
• User ID:
changing the user name
• System:
access to the transmitter programming system. If
system protection is selected, the key symbol appears in the
Start display.
In this case you cannot gain access to the system until you
input the user number (PIN).
