ROBBE-Futaba FX-40 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 105

background image

System menu

F X - 4 0

30

14. PLAYER, FOR PLAYING MUSIC FILES

The Player is used for playing back music files in Windows
Media Audio Format (wma). The player does not support the
mp3 file format; such files have to be converted to wma format
before they can be played. If you visit the T14MZ / FX-40 sup-
port page of the robbe website you will find information on
locating free programs designed for converting mp3 files into
wma format. In the near future a free conversion program will
be available there for downloading.

Graphical display of play
time and remaining play time

NOTE:

The volume level which you set in the Player menu applies to
the output of all music and sound files.
The music files must be copied into the WMA folder on the DP
card. The Player only looks for files in this folder; if a file is
copied into a different location, it will not be displayed and can-
not be played.

Playing music files places a great strain on the Windows ope-
rating system, with the result that other audible outputs or the
graphical menu control system may show a slightly delayed
response when music is playing.

We suggest that you keep the Sampling Rate as low as possi-
ble, or reduce the files to a low mono bit-rate if using the inter-
nal monaural loudspeaker.
This type of file does not absorb so much of the Windows ope-
rating system’s resources.

Repeat function: plays all the songs
on the DP card in turn until you press
the Stop button.

Sequence function: the Start button is
used to play back the next piece of
music stored on the DP card.

If you move to the “Switches” sub-menu, you can select any of
the transmitter’s controls to operate the Player. For example,
you may wish to assign the volume function to the centre rotary
knob CD.

NOTE:

If you define transmitter controls for operating the Player, the
corresponding touch-screen controls in the Player menu are
erased to avoid any adverse mutual inter-actions.

Volume adjustment

Start / Stop - Key

Track select

Volume adjust

Start/Stop

Pause

Switch selection

Pause-Key

Numerical display of play
time / remaining play time

«
...
28
29
30
31
32
...
»

Содержание FX-40










































































































Отзывы:

Нет отзывов

Похожие инструкции для FX-40

AquaTrans AT868

Бренд: GE Страницы: 67

Бренд: Icom Страницы: 108

Бренд: Yaesu Страницы: 42

Бренд: Yaesu Страницы: 77

Бренд: WAC Lighting Страницы: 6

RADIO EVO GHOST

Бренд: CCE Страницы: 14

W-DMX Micro T-1 TRX G5

Бренд: Chauvet Professional Страницы: 15

Бренд: GE Страницы: 14

MR HH475 FLT BT/EU

Бренд: Cobra Страницы: 67

Бренд: FISCHER Страницы: 12

METPOINT PRM SP11

Бренд: Beko Страницы: 28

Бренд: KMC Controls Страницы: 2

Бренд: Leviton Страницы: 2

Бренд: Schluter Systems Страницы: 54

Бренд: Arm Electronics Страницы: 1

Бренд: Heathkit Страницы: 52

Бренд: TEM Страницы: 121

Бренд: HACH LANGE Страницы: 127

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды