Start display
F X - 4 0
10. DESCRIPTION OF THE START DISPLAY
The most important information relating to the transmitter pro-
gramming is displayed on the Start screen. At the same time
most of the display fields also constitute operating buttons,
and you can move to the Set-up menu for the appropriate
function simply by pressing the corresponding area of the
screen.
23
Timer 1 + 2
Timer mode
and pre-set
time display
Reset timer to
pre-set time
value
Press to call up
the Set-up
menu
Start / Stop
button and
time display
Modulation dis-
play
Total operating
time. Press to
reset.
Display of current spot
frequency and channel
number. Press to call
up the Set-up menu.
Music player for playing
back music files and
adjusting volume.
Press to call up the Player
menu.
Date and time
of day. Press to
call up the Set-
up menu.
Trim position display of
the trimmers T1 … T8
and CD. Press to call
up the display of all
trimmers.
CAUTION: IMPORTANT!
Please make it a routine matter to check the residual battery
capacity as often as possible, and recharge the transmitter
battery in good time. If the low-voltage alarm (at 19%) should
be triggered during a flight, land the model without delay,
switch off the transmitter and recharge the battery.
Please check before you launch a model that you have selec-
ted the appropriate model memory!
• The data displayed on the screen is constantly updated, and
this can occasionally result in the numeric display flickering
slightly. This is completely normal, and does not indicate a
transmitter fault.
• The contrast of the screen and the brightness of the back-
lighting can be adjusted in the “Display” Set-up menu. In the
same menu you can adjust the power-on time for the back-
lighting.
IMPORTANT:
• The transmitter features an automatic power-off function
which is triggered if the sticks are not moved (or are moved
only very slightly) within the pre-set time The power-off time
can be set in the “Transmitter power-off time” menu point.
The power-off time can be set to any value within a broad
range (10 … 60 minutes), or even switched off completely
(i.e. power always on). The default setting is 30 minutes.
Model name
Press to call up
the Model Select
menu.
User name
Press to call up
the Input menu
Flight condition
name
Press to call up the
Select menu.
RF transmis-
sion indicator
Battery capacity display
The low-voltage alarm
sounds at 19% capacity.
Cease operations immedi-
ately if this should occur!
Menu buttons
• System
• Model
• Linkage
Direct buttons
The buttons S1 … S3 are located in the
transmitter case just below the screen.
Pressing them takes you directly to the
three main Select menus: System,
Linkage and Model.
