36 • Measuring Mode, Normal Operation
GX-2012 Operator’s Manual
displays the current gas readings, and that you should press the DISPLAY (ADJ)
button to exit Snap Log Mode without saving a set of snap log data.
2. You can change the Station ID to be used with the snap log by pressing the (SHIFT)
button and then pressing the DISPLAY (ADJ) button. The Station ID Select Screen
will appear and the current Station ID will be flashing.
3. Use the (SHIFT)
and AIR
buttons to scroll to the desired station ID, then press
and release the POWER ENTER button to return to the Snap Logging Screen
sequence.
To return to the Snap Logging Screen sequence without changing the station ID, press
and release RESET SILENCE.
4. To take a snap log of the current gas readings, press and release the POWER ENTER
button. The unit will display SAVED along the bottom of the screen before returning
to the Snap Logging Screen sequence.
To exit Snap Log Mode without taking a snap log or when you are finished recording
snap logs, press and release the DISPLAY (ADJ) button. The unit will immediately
return to the Normal Operation Screen.
5. The data recorded in Snap Log Mode can be viewed in Display Mode. See “Snap
Logging Screen” on page 53 for more information.
S Id
SEL
001
SAVED
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
