90 • Leak Testing
GX-2012 Operator’s Manual
Viewing Snap Log Data in Leak Check Mode Operation
Snap log data can be viewed while in Leak Check Mode. If snap log data was taken while
in Normal Operation, that data will also appear.
1. Turn the GX-2012 on as described in “Turning On the GX-2012, Leak Check Mode”
2. Press and hold the RESET SILENCE button and then press and hold the DISPLAY
(ADJ) button and release both.
3.
If no snap logs have been performed, the following screen will appear.
Press and release the DISPLAY (ADJ) button to return to Leak Check Mode.
4.
If snap logs have been performed in either Normal Operation or Leak Check Mode
Operation, one of the following screens will appear. LEAK CK MODE will appear in
the upper left corner of Leak Check Mode Operation data to indicate that the snap log
was taken during Leak Check Mode Operation.
This screen indicates the year, month, day, and time that the most recent snap log was
taken. The number along the bottom of the screen indicates the snap log ID number.
The first snap log that is taken is given an ID of M001. The next snap log ID is M002.
The ID number increases sequentially with each set of snap log data. Use the AIR
and (SHIFT)
buttons to scroll through different snap log IDs and view what time
and day they were taken. Snap log data that was taken in Leak Check Mode operation
will have two snap log ID numbers. One number is for the base reading and the other
is for the peak reading.
NO DATA
2012
2
15
14:17
LEAK CK MODE
M009
2011
8
31
22:39
M023
Normal Operation Leak Check Mode Operation
Snap Log Snap Log
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
