GX-2012 Operator’s Manual
Overview • 93
Chapter 6: Maintenance Mode
Overview
This chapter describes the GX-2012 in Maintenance Mode. In Maintenance Mode, you
can:
•
update the date and time
•
perform a fresh air adjust
•
perform an auto calibration
•
perform a single calibration
•
perform a bump test
•
turn the lunch break setting on or off
•
update the alarm latching setting
•
turn alarm silencing on or off
•
update the interval trend time setting
•
update warning, alarm, STEL, and TWA settings
•
turn the clear data logger screen on or off
•
turn the bump test function on or off
•
turn the pump off screen on or off
•
update bump test parameters
•
update the confirmation beep setting
•
update the data logger overwrite setting
•
update the calibration interval setting
•
turn the calibration reminder function on or off
•
update the calibration expired action setting
•
update the calibration check setting
•
update the bump test interval setting
•
turn the bump test reminder function on or off
•
update the bump test expired action setting
•
update the bump test check setting
•
turn the ID display function on or off
•
update the backlight settings
•
turn the autozero function on or off
•
turn the demand zero function on or off
•
update the Leak Check/Bar Hole Mode setting
•
update the bar hole sampling time
•
turn Portuguese on or off
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
