Riso MH 9350 Скачать руководство пользователя страница 58

Страница: 58 / 218

Chapter 3 Functions for Master Making

Adjusting the Gradation of Photos

[Tone Curve]

Touch [Tone Curve] in the [Func-
tions] tab screen.

Touch a target setting button.

■

[Lights]

You can adjust the expression of the bright
parts in the photo.

■

[Shadows]

You can adjust the expression of the dark parts
in the photo.

Touch [OK].

Adjusting the Contrast of the

Original [Contrast]

Touch [Contrast] in the [Basic] tab
screen.

Touch a target setting button.

■

[Auto]

You can select this button only when [Line] is
selected in [Image] (

53).

When you select [Auto], the contrast is
adjusted optimally according to the paper color
of the original.

■

[1] to [5]

You can adjust the scanning density in five lev-
els.
Select [1] for the lowest density.
Select [5] for the highest density.

Touch [OK].

You can adjust the tone of the bright parts and dark

parts in a photo in incremental levels.

[Tone Curve] can only be selected when a

setting other than [Line] is specified for

[Image] (

53).

Cannot be used with the following function.

[Color Separation] - [Photo Color Separation]

Setting

Description

[+1]

Reduces the range that is

expressed in bright colors.

The fine parts within the bright

range becomes more visible.

[0]

Applies standard processing.

[-1]

Enlarges the range that is

expressed in bright colors.

Some fine parts within the bright

range may not be visible.

Setting

Description

[+1]

Enlarges the range that is

expressed in dark colors.

Some fine parts within the dark

range may be blurred.

[0]

Applies standard processing.

[-1]

Reduces the range that is

expressed in dark colors.

The fine parts within the dark

range becomes more visible.

You can adjust the contrast according to the condi-
tions such as the paper color and the tint of the orig-
inal.

You can change the default setting in
[Scanning Contrast] (

138) under

[Admin.].

The [Contrast] setting cannot be changed
when [Ink Saving] (

58) is turned on.

Содержание MH 9350



























































































































































































































Результаты поиска

Содержание MH 9350

Отзывы:

Похожие инструкции для MH 9350

Бренды по названию

Популярные бренды

Riso MH 9350, Руководство пользователя

Результаты поиска

Содержание MH 9350

Отзывы:

Похожие инструкции для MH 9350

Бренды по названию

Популярные бренды