Riso MH 9350, Руководство пользователя

Страница: 67 / 218

Chapter 3 Functions for Master Making
65
3
2
Display the master making basic
screen for dual-color mode.
In the [HOME] screen (
A
24), touch [
m
Dual-
Color].
3
Place an original.
(
A
33 “Placement of Originals”)
4
Place the paper.
(
A
30 “Setting up the paper feed tray and the
paper”)
5
Set the paper receiving tray.
(
A
31 “Setting up the paper receiving tray”)
6
Touch [Separation] in the [Func-
tions] tab screen.
7
Touch [Specified area].
8
Touch [OK].
9
Set the other required printing
conditions.
(
A
52 “Functions for Master Making”)
10
Press the [START] key.
Scanning of the original starts.
B
Do not create dots that cause
high contrast.
B
The maximum number of pen
frames that you can use for one
original is 20. Drawing more than
20 frames results in an error.
B
Keep at least 3 mm (1/8 inches)
between pen frames. If frames are
too close to each other or over-
lap, the frames are not recog-
nized as pen frames.
B
Keep a pen frame approximately
3 mm (1/8 inches) away from any
letter or image on the original.
The area within approximately 3
mm (1/8 inches) from the frame
will be missing.
B
Do not double a pen frame. The
inside frame is not recognized as
a pen frame.
B
The specified area of a pen frame
that extends outside the master
making range (
A
18 ) is not sepa-
rated.
Wrong
Correct Wrong
3 mm (1/8 inches)
3 mm (1/8 inches)
Wrong
B
Place the original on the glass
platen. The optional auto docu-
ment feeder cannot be used.
B
The lower right part of the screen
displays the print drum (cylinder) to
which the original is assigned: [
k
(Print Drum 1)] or [
l
(Print Drum
2)]. Touch [Sw.Color] to switch the
print drums (cylinders).