Riso MH 9350, Руководство пользователя

Страница: 60 / 218

Chapter 3 Functions for Master Making
58
■
[20mm] to [80mm] ([3/4"] to [3 1/8"])
You can select these buttons only when [Erase]
has been selected.
4
Select an original size.
If you selected a button other than [Auto] for
[Erasure Width], select a size with the original
book open.
The center part of the selected [Page Size] is
erased.
5
Touch [OK].
When [Page split] is set, place the paper in the
direction of a short edge paper feed.
Saving Ink [Ink Saving]
1
Touch [Ink Saving] in the [Func-
tions] tab screen.
B
When you select [Auto], the fol-
lowing image parts are also
erased or processed in the half-
tone.
C
A black image extending from
the area around the original
C
A black image extending from
the binding section
B
When you select a button other
than [Auto], the shadow gener-
ated around the original is not
erased.
B
When [Page split] is set, the origi-
nal is scanned twice. Do not
move the original until the scan-
ning is complete.
Paper feeding direction
Short side
Long side
By turning on [Ink Saving] when making a master,
you can reduce the amount of ink consumption dur-
ing printing.
B
When [Ink Saving] is turned on, the
print density becomes lower.
B
Even if you change the [Ink Saving] set-
ting during the printing process, the
new setting is not applied to the master
that has already been made and loaded
on the print drum (cylinder). The
changed [Ink Saving] setting is used for
the next master making.
B
When [Ink Saving] is on, the settings of the
following functions cannot be changed.
C
[Contrast] (
A
56)
C
[Print Density] (
A
97)
C
[Book Shadow] (
A
57)
C
[Preview] (
A
83)
C
[Overlay] (
A
91)
B
When a master is made with [Ink
Saving] turned on, the [
S
] icon is
displayed in the message area.