RIGO PERFECT BINDER 420 HM, Руководство пользователя

Страница: 20 / 60

20
find this in the 8. 4. SETUP screen at the point of 14. Value of the thickness of the
cover sheet.
The carriage clamp is at the upper position basicly. It goes from the starting steel
plate up to the binding unit during the binding period. It goes down here, and
presses the spine of the book to the cover sheet.
The closing of carriage is pneumatic to speed up the binding
cycle, therefore the opening distance needs tobe adjusted
depending to the book thickness to be bound. We put a
numerical counter on the unit. For example in case of 20 mm
book, the value of the counter shoud be adjusted to approx. 25,0 to be able to put
the book into the clamp freely.
Do not put your hand in the way of the carriage clamp. It can
cause severe personal injury! Be sure that nothing blocks the moving of the carriage
clamp, before starting the binding.
The machine must always be stopped with the emergency stop
button.
5. 4. Milling unit
This unit is responsible for the working of the spine of the
book, which can happen with slitting and milling. At the
installation the rotation of the milling unit must be
checked. Never mill a book already bound, this leads to
the immediate failure of the milling unit.
On the Perfect Binder 420 it is possible to
tilt one side of milling station to be able to
bind sewed books with the machine. There
is a lever inside the machine and by
turning it the left side of the milling station moves down. To reach this
lever the operator must open the right upper cover of the machine.
To be able to turn the lever first the copper fixing screw must be
loosened and then the lever can be turned to the right. Then the
copper screw must be fastened. The milling height must be set to 0,0 value.