RIGO PERFECT BINDER 420 HM, Руководство пользователя

Страница: 19 / 60

19
Tel: +4
5 36173363
, e-mail:
info@rich-ebbesen.dk
5. Description of the units of the machine
The Perfect Binder 420 can be separated by units to ease the understanding and
sevicing of the machine.
The units are the following:
5. 1. Frame of the machine
5. 2. Starting steel plate unit
There is a jogger motor in this unit, this
helps the accurate and quick jogging for
the binding. The up – down moving of
the starting steel plate determines the
level of the spine of the book in
proportion to the milling disk. This
attribute allows the possibility of
adjustment of the milling height. This
height can be 0 – 3 mm. Just slitting can
happen at 0 – 1 mm height, milling and
slitting take place at 1 – 3 mm height as
well. We can reach this function in the
SETUP menu. You can find the description of the adjustment in the 8. 4 SETUP
screen at the point of 13. Value of milling height.
5. 3. Carriage clamp (vice)
This unit holds the document during the
binding process. The carriage clamp is
moving in several directions.
Opening – closing of the clamp to hold
the document and to measure the
thickness of the book. With the help of
this function can be adjusted
automatically the side gluing wheels and
the scoring wheels. The maximum
thickness of the book can be hold is 50
mm. The up – down moving of the
carriage clamp is relevant because of
several reasons, since we can adjust the
thickness of the cover page by this
function of the carriage clamp. You can