Riello Family Condens 2.5 - 3.5 IS Скачать руководство пользователя

Страница: 5 / 220

ENGLISH

1 - GENERAL SAFETY DEVICES

The boilers produced in our factory are built with care down to the last

component to protect both the user and installer from eventual accidents.

We therefore recommend qualified personnel that after working on the

product they should pay particular attention to the wiring, especially the

bare wires, that must not be exposed outside the terminal board for any

rason to prevent any contact with the live parts of the wiring.

This instructions manual is integral parts of the product. Make sure they

remain with the boiler, even if it is transferred to another owner or user

or moved to another heating system. In case of loss or damage, please

contact your local Technical Assistance Service for a new copy.

This boiler may only be installed and serviced by qualified fitters who

satisfy the requirements of local rules. Work must be done in compliance

with regulations in force and subsequent updates.

The boiler must be serviced at least once a year. This should be booked

in advance with the Technical Assistance Service.

The installer shall instruct the user in the operation of the boiler and the

safety devices.

This boiler may only be used for what it was expressly built to do. The

manufacturer declines all contractual and non-contractual liability for

injury to persons or animals or damage to property deriving from errors

made during installation, adjustment and servicing and from improper

use.

This appliance is used to produce hot water and must therefore be

connected to a heating and/or a domestic hot water system, according

to its performance and power.

After removing the packaging, make sure the contents are undamaged

and complete. If this is not the case, contact your dealer.

The safety valve outlet must be connected to a suitable collection and

venting system. The manufacturer declines all liability for any damage

caused by the safety valve.

The safety and automatic adjustment devices on the appliance must

never be modified during its lifetime, except by the maker or dealer.

If the appliance develops a fault and/or works badly, switch it off and do

not attempt to repair it yourself.

Immediately after installation, inform the user that:

- in the event of leaks, he/she must shut off the water supply and

promptly inform the Technical Assistance Service

Family Condens KIS:

he/she must check from time to time to make

sure the symbol is not lit on the control panel. This symbol means

that the pressure in the water system is incorrect. If necessary, fill the

system as described in the paragraph “Boiler functions”

Family Condens IS:

must periodically check, on the display, that

the pressure value is between 1 and 1,5 bar; if not fill the system as

described in the paragraph “Boiler functions”

- if the boiler is not planned to be used for a long period, he/she should

call in the Technical Assistance Service to perform the following op

erations:

- turn off the main boiler and general system switches

- close the gas and water taps on both the heating (

Family Condens

KIS - Family Condens IS

) and domestic hot water circuits (

Family

Condens KIS

only)

- drain the heating (

Family Condens KIS - Family Condens IS

) and

domestic hot water (

Family Condens KIS

only) circuits to prevent

freezing.

Connect the outlet collector to a suitable outlet system (refer to chapter

5).

Safety measures:

the boiler should not be used by children or unassisted disabled people
electrical devices or equipment, such as switches, appliances, etc.,

should not be used if there is a smell of gas or fumes. If there is a gas

leak, open all the doors and windows to ventilate the area, turn off the

general gas tap and immediately call the Technical Assistance Service

do not touch the boiler barefoot or if parts of your body are wet or damp
press the

button until “- -” is shown on the display and disconnect the

electricity supply by turning off the two-position system switch, before

cleaning

it is forbidden to modify the safety or adjustment devices without the

manufacturer’s permission and relative instructions

do not pull, detach or twist the wires from the boiler even if they are not

connected to the power supply

ENGLISH

  do not block or reduce the size of the ventilation openings in the room
  do not leave inflammable containers or substances in the room
  keep packaging out of reach of children

  only use appliance for purposes it is devoted to
  do not lean any object on the boiler
  do not tamper with sealed elements
  it is forbidden to block the condensate outlet.

2 - BOILER INSTALLATION

Boiler must only be installed by qualified personnel.

Boiler is available in the following models:

Type

combined

CH only

Category

Model

KIS

Power

25-35 kW

Family Condens KIS

is a C-type condensation wall-mounted boiler for heat

ing and producing domestic hot water;

Family Condens IS

is a C-type con

densation wall-mounted boiler and is able to operate in different conditions:

CASE A:

only heating. The boiler doesn’t supply domestic hot water

CASE B:

only heating with water tank connected, managed by a thermo

stat, to prepare domestic hot water

CASE C:

only heating with water tank connected (kit available upon re

quest), managed by a temperature sensor, to prepare domestic hot water.

Connecting a water tank not supplied by us, please be sure that the NTC

sensor ised has the following features: 10 kOhm at 25°C, B 3435 ±1%.

Depending on the type of installation selected, it is necessary to set the

parameter “domestic hot water mode”. Refer to page 20 for description and

setting parameter operations.

Family Condens

boilers are fitted with:

- circulation at adjustable speed (PWM = Pulse-Width Modulation)

- 1- 10 modulation, the boiler is designed to automatically modulate the flow

rate supplied between a maximum and a minimum (see technical data)

- Range Rated, indicates that the boiler has a device for adapting to the

system’s heat requirements, making it possible to adjust the boiler’s flow

rate to the energy requirements of the building

The following types of fumes outlet are available for this kind of boiler:

B23P; B53P; C13,C13x; C23; C33,C33x; C43,C43x; C53,C53x; C63,C63x;

C83,C83x, C93,C93x.

B23P

configuration (if installed inside), do not install the apparatus in

rooms used as bedrooms, bathrooms, showers or where there are open

vent stacks without own air exchange. The boiler must be installed in an

adequately ventilated room.

configuration the boiler can be installed in any type of room and there

are no limits to aeration conditions and size of room.

For proper installation, we remind you that:

- the boiler mus

t not be installed over a kitchen or any other cooking equip

ment

- minimum spaces are to be left in order to allow maintenance operations:

at least 5 cm every side and 20 cm under the boiler

- it is forbidden to leave inflammable substances in the room

- suitably insulate heat-sensitive walls (e.g.: in wood).

Support plate and integrated pre-installation template are provided for with

the boiler.

Mounting instructions (fig. 26):

- fix the boiler support plate (

) with the template (

) to the wall and use a

plumb to check that it is perfectly horizontal

- trace out 4 holes (Ø 6 mm) for fixing the boiler support plate (

) and 2

holes (Ø 4 mm) for fixing the pre-installation template (

)

- make sure all the measurements are correct, then drill holes in the wall

using a drill and point with the diameter given previously

- fix the plate to the wall by the supplied anchor screws

- make hydraulic connections.

After installing the boiler, the screws

(Fig. 28) can be removed. After

installing the boiler and connecting it to the water and gas supplies, fit the

lower cover so that its hooks slip into the relative slots in the lower part of

the boiler. Fix the lower cover with the screw

(Fig. 29) contained in the

documentation envelope in the boiler.

Cleaning the system and characteristics of heating circuit water

After installing a new system or replacing a boiler, clean the heating system.

To ensure the product works correctly, after cleaning, additivating and/or

The following symbols are used in this manual:

CAUTION = operations requiring special care and adequate prepa

ration

NOT ALLOWED = operations that MUST NOT be performed

IS:

DHW functions refer only if a water tank is connected (accessory

available on request).

Содержание Family Condens 2.5 - 3.5 IS





























































































































































































































Результаты поиска

Содержание Family Condens 2.5 - 3.5 IS

Отзывы:

Похожие инструкции для Family Condens 2.5 - 3.5 IS

Бренды по названию

Популярные бренды

Riello Family Condens 2.5 - 3.5 IS, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Family Condens 2.5 - 3.5 IS

Отзывы:

Похожие инструкции для Family Condens 2.5 - 3.5 IS

Бренды по названию

Популярные бренды