Page 53 of 88
RN.333. DI Common Front Panel Facilities
The Status Indicators of the RN.333.DI and the connectors of the Network and Control Section are the
same as on any other 19” RockNet device. For detailed description please see the generic part of this
manual.
RN.333. DI Common Configuration
The RN.333. DI provides the complete configuration capabilities that are accessible via the front panel
operation. The operation is described in the respective generic chapters of this manual.
•
Default Mode
- Assignment of Add Quads (left -hand and right-hand Quad)
- Assignment of Device ID
•
Options Mode
- Set Sync Master
- (Set External Sync)
- Lock Front Panel
- Display Temperature
- 80 Ch mode (if Master)
- Switch Display
•
Channel Mode (is described in this chapter in detail)
- Set MUTE
RN.333. DI Input Section Details
The RN.333.DI provides 8 AES/EBU input channels on XLR connectors.
The picture below shows two of these channels. The left one belongs to the left-hand Quad and the
right one belongs to the right-hand Quad. The separation line (8) and the two yellow arrows (8a) and
(8b) indicate the Quad correlation. The designation point (7) can be used for individual channel labels.
1
XLR INPUT Connector
2
MUTE Indicator
3
SIGNAL P RESENT Indicat or
4
CLIP Indicator
5
LOCK Indicator
6
Channel SELECT button
7
DESIGNATION Point
8
Quad separation line
8a
Right-hand Quad channels
8b
Left-hand Quad channels
RN.333. DI input section
RN.333. DI Channel LED De scription
MUTE
Mute
Indicator LED
Red
on = channel muted
SIG
Signal Indicator LED
Green
Lights up if signal is present (0dBFS)
CLIP
Clip
Indicator LED
Red
Lights up if signal clips (-48dBFS )
LOCK
Lock
Indicator LED
Yellow
on = valid AES framing available at the input
USO
RESTRITO
