Page 44 of 88
Mute
To mute a channel, push and hold the channel select button of the respective channel and use the +
and – buttons underneat h the MUTE display to select bet ween
OF
OF
OF
OF
(not muted) and
ON
ON
ON
ON
(muted). An
active channel mut e is indicated by the mute indicator (mut e on = red LE D) underneath the input XLR
connector.
1
Push & hold SEL button
Channel status occurs in
displays
2
MUTE on or off
3
MUTE on or off
1
Release SEL button
Gain
To change channel gain settings, push and hold the channel select button of the res pective channel
and use the + and – buttons for gain settings. Maximum gain setting is +66dB. An attenuation of max.
-6dB can be set accordingly. Gain changes will be performed in 1 dB steps. Push and hold the respec-
tive keys for speedy settings.
1
Push & hold SEL button
Channel status occurs in
displays
2
Decrement GAIN value
3
Increment GAIN value
1
Release SEL button
Phantom Power
To activate or deactivate 48V phantom power, push and hold t he channel select button of the respec-
tive channel and use the + and – buttons underneath the P HA NTOM display t o select between
OF
OF
OF
OF
(phantom power off) and
ON
ON
ON
ON
(phantom power on). A n active phantom power is indicated by the phan-
tom power indicator (phantom power on = yellow LE D) underneath the input XLR connector.
To prevent the noise caused by condenser microphone or active DI boxes after applying phantom
power, the activation of phantom power will cause a short mute on the respective channel.
1
Push & hold SEL button
Channel status occurs in
displays
2
PH POWER on or off
3
PH POWER on or off
4
Short MUTE while switch-
ing PHANTOM
1
Release SEL button
USO
RESTRITO
