Page 60 of 88
RN.331.DD Front Panel Configuration
Channel Mode
The Channel Mode of the display is a momentary function. It is only active as long as the channel
select button (SEL) beside the XLR connector of the respective channel is pushed. As soon as t he
button is releas ed the display falls back to Default Mode and shows the Quad routing and the device
ID.
The Channel Mode is available for each single channel and displays the channel parameters that can
be changed:
•
MUTE
OF
OF
OF
OF
(channel not muted)
On
On
On
On
(channel muted)
RN.331.DD Channel Settings
The RN.331.DD unit is designed as a digit al in- and out put device. Use the RN.331.DD to drive your
amplifier systems for FOH or monitoring and to insert digital sources into your RockNet audio net work.
All parameters for configuring RN.331. DD are locally accessible.
1
Push & hold select chan-
nel button (SEL)
Channel status occurs in
displays:
Left hand display: MUTE
Right-hand display:
LEV EL
1
Release SEL button
Access Channel Mode
Mute
To mute a channel, push and hold the channel select button of the respective channel and use the +
and – buttons underneath the MUTE display to select between OF (not muted) and ON (muted). An
active channel mute is indicated by the MUTE indicator (mute on = red LED) underneath the input
XLR connector.
1
Push & hold select
channel button (S EL)
Channel status occurs in
displays
2
MUTE on or off
3
MUTE on or off
1
Release SEL button
USO
RESTRITO
