Ricoh LD260c Скачать руководство пользователя страница 118

Страница: 118 / 276

Changing the color balance

Changes the settings stored in color balance programs.

Press [Edit /Color].

Press [Color], and then press [Adjust Color].

Press [Color Balance], and then press [Program Color Balance].

Select the program number (1-3) to be changed.

The programmed color balance appears.

Change the registered settings.

Press [Program Color Balance].

Press [Program], and then press the program number to be overwritten.

Press [Yes].

The program is overwritten.

Press [OK] twice.

Recalling the color balance

Applies settings registered in color balance programs to the copy job.

Press [Edit /Color].

Press [Color], and then press [Adjust Color].

Press [Color Balance], and then press [Program Color Balance].

Select the program number you want to use.

Press [OK] twice.

• The adjusted settings will be deleted and the initial values will be reset, when Auto Clear has been

performed, when the [Clear Modes] key has been pressed, or when the power has been turned off.

3. Color Copying

116

Содержание LD260c





















































































































































































































































































Результаты поиска

Содержание LD260c

Отзывы:

Ricoh LD260c, Руководство по эксплуатации, Страница: 118 / 276

Результаты поиска

Содержание LD260c

Отзывы: