Putting into Operation
R&S FSH
1145.5973.12 1.6
E-14
RS-232-C optical interface
(on the right-hand side of the R&S FSH; can be accessed by folding out the stand)
The RS-232-C optical interface is for connecting a printer or PC. The R&S FSH-Z34 RS-232-C optical
cable or the FSH-Z37 USB optical cable R&S is used to make the connection. Starting with the
R&S FSH serial numbers listed below, the R&S FSH-Z37 USB optical cable will replace the
R&S FSH-Z34:
Model Ser.
No.
R&S FSH 3 (1145.5850.03)
103001
R&S FSH 3 (1145.5850.13)
103501
R&S FSH 3 (1145.5850.23)
102501
R&S FSH 6 (1145.5850.06)
101001
R&S FSH 6 (1145.5850.26)
101501
R&S FSH 18 (1145.5850.18)
all
If you use the R&S FSH-Z37 USB optical cable, you need to install a software driver on your PC. The
CD-ROM, which is supplied with the R&S FSH, includes both the driver and the installation instruction.
Important:
If a computer with an Intel processor with HT technology and Microsoft Windows XP and
a USB connecting cable without the labeling Rev. II is used, a connection with the R&S FSH cannot be
set up as long as the Hyper Threading function is active. To use the USB cable, you must first disable
the HT function. You can do this as follows: Go to
START,
select
Run…
and then enter msconfig under
Open
. Then select the BOOT.INI tab and enter /NUMPROC=1 under expanded functions.
The R&S FSH is now supplied with a new Rev. II-labeled USB cable starting from the serial numbers
listed below. This adapter cable contains a USB chip-set of the latest generation and does not require
the deactivation of the hyper threading function as described above. The Rev. II cable must always be
used for computers with Intel Dual Core processors.
Model Ser.
No.
R&S FSH 3 (1145.5850.03)
104374
R&S FSH 3 (1145.5850.13)
103864
R&S FSH 3 (1145.5850.23)
103927
R&S FSH 6 (1145.5850.06)
101738
R&S FSH 6 (1145.5850.26)
102595
R&S FSH 18 (1145.5850.18)
all
The optical connection prevents spurious measurements due to interference from these devices.
Use the Serial/Parallel Converter R&S FSH-Z22 for printers with a parallel interface.
Printers with a USB interface cannot be connected directly to the R&S FSH.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com
