Trace Settings
R&S FSH
1145.5973.12 4.22
E-14
Operating sequence:
Press the TRACE key.
Press the DETECTOR softkey.
The submenu for selecting the detector opens.
If automatic operation has been selected, the AUTO
COUPLED menu item is highlighted in green and the
R&S FSH displays the detector that is set to match the
trace mode that is set.
To switch automatic operation on or off:
Using the cursor keys or rotary knob, select AUTO
COUPLED from the menu.
Using the ENTER key or the DETECTOR softkey,
switch automatic operation on or off.
When automatic operation is switched on, the
R&S FSH also sets the detector that matches the trace
mode that is set.
To set the detector manually:
Using the cursor keys or the rotary knob, select the detector you want and confirm by pressing the
ENTER key or the DETECTOR softkey.
The R&S FSH indicates the detector that has been selected in the top left-hand corner of the screen
(Detect: Auto Pk in Fig. above). If AUTO COUPLED is switched on and a detector that does not
accommodate automatic operation is set, the R&S FSH will switch automatic operation off.
Trace memory
The R&S FSH can transfer a trace to the trace memory and also display the current trace and the trace
in the trace memory for comparison. The saved trace is always displayed in white to distinguish it from
the current trace.
Operating sequence:
Press the TRACE key.
Press the TRACE -> MEMORY softkey.
The R&S FSH transfers the currently displayed trace to
the trace memory.
Press the SHOW MEMORY softkey.
The R&S FSH displays the saved trace in white. The
SHOW MEMORY softkey label is highlighted in green
to indicate that the trace in the trace memory is being
displayed.
To remove the saved trace from the screen, press
the SHOW MEMORY softkey again.
深圳市盛腾仪器仪表有限公司
Tel:0755-83589391
Fax:0755-83539691
Website: www.Sengt.com
