RADWAG PM 10.C32, Руководство пользователя

Страница: 92 / 129

- 92 -
−
Data bits - 7, 8 bits
−
Stop bits - 1, 2 bits
−
Parity - None, Odd, Even
30.2. ETHERNET Port Settings
Procedure:
•
Select <Ethernet> port, set respective transmission parameters:
−
DHCP - Yes / No
−
IP Address - 192.168.0.2
−
Subnet mask - 255.255.255.0
−
Default gateway - 192.168.0.1
Caution: The above presented values serve informative purposes only. Set the transmission
parameters in accordance with your local network.
Return to weighing procedure and restart the weighing device.
30.3. Wireless Communication Settings
Caution:
1.
Set the transmission parameters in accordance with your local network.
2.
In order to provide correct communication between the computer and the weighing
device via <Wireless communication> port, you must set computer port parameter in
your balance to value <Wireless communication>:
„PERIPHERALS/COMPUTER/PORT/Wireless communication”. You must also set
wireless communication parameters, to do it correctly follow the below procedure.
Balances equipped with wireless communication module display respective pictogram at
the top of the screen, provided that the module is active.
Pictogram for status of wireless communication:
No. Pictogram Description
1 The weighing device is connected, very strong signal
2 The weighing device is connected, strong signal
3 The weighing device is connected, poor signal
4 The weighing device is connected, very poor signal
5
No connection (signal too poor, selected network unavailable,
connection parameters invalid – password, IP etc.)
Exemplary settings for wireless communication port: