RADWAG PM 10.C32, Руководство пользователя

Страница: 116 / 129

- 116 -
12_” Checkweighing” <CR><LF>
OK <CR><LF> - command carried out
Set Working Mode
Command overview:
Command sets particular working mode.
Format: OMS_n <CR><LF>
Response options:
OMS_OK <CR><LF> - command carried out
OMS_E <CR><LF>
- error in-course of command execution, no parameter
or incorrect format
OMS_I <CR><LF>
- command understood but not accessible at this
moment
n - parameter, decimal value determining working mode number.To see detailed description
go to OMI command.
Example:
Command: OMS_13<CR><LF> - set STATISTICS mode
Response: OMS_OK<CR><LF> - STATISTICS mode set
Give Current Working Mode
Command overview:
Command returns accessible working modes.
Format: OMG <CR><LF>
Response options:
OMG_n_OK <CR><LF>
- command carried out, response: current working mode
OMG_I <CR><LF> - command understood but not accessible at this moment
n - parameter, decimal value determining working mode number.To see detailed description
go to OMI command.
Example:
Command: OMG<CR><LF> - return current working mode
Response: OMG_13_OK<CR><LF> - balance set to STATISTICS mode
Give Accessible Units
Command overview:
Command returns units available for a particular device and for a current working mode.
Format: UI <CR><LF>
Response options:
UI_”x
1
,x
2
, … x
n
”_OK<CR><LF> - command carried out, returns accessible units
UI_I <CR><LF> - command understood but not accessible at this moment
X - unit symbols, separated by means of commas.
x
→ g, mg, ct, lb, oz, ozt, dwt, tlh, tls, tlt, tlc, mom, gr, ti, N, baht, tola, u1, u2
Example:
Command: UI <CR><LF> - return available units
Response: UI_”g, mg, ct”_OK<CR><LF> - response: available units
Set Unit
Command overview:
Command sets current unit for a particular device.