RADWAG PM 10.C32, Руководство пользователя

Страница: 105 / 129

- 105 -
Procedure:
•
Press key.
•
Enter <PERIPHERALS> menu.
•
Enter <ADDITIONAL DISPLAY> submenu.
•
Set balance parameters related to cooperation with the additional display;
<PORT> - selection of port for connecting the additional display:
o
available options: NONE, COM 1, COM 2.
Caution:
The balance cooperates with RADWAG additional display.
Ensuring correct cooperation between the weighing device and the additional display
requires baud rate parameter value to be set to 115200 bit/s for the port to which the
additional display is plugged.
Additional display features text area for extra information such as date, tare value etc.
(balance variables). Displayed data content is set using the weighing device.
Procedure:
•
Press key.
•
Enter <PERIPHERALS> menu.
•
Enter <ADDITIONAL DISPLAY> submenu.
•
Enter <BOTTOM TEXT AREA TEMPLATE> parameter, an on-screen keyboard
is displayed. Enter respective data.
Using the keyboard write appropriate text, press key to confirm. The text
can consist of 19 characters maximum. If you want to display any variable, enter
it following the rules, e.g.: {3} – time. For list of available variables refer to section
13.4.
31.6. Ambient Conditions Module
Ambient Conditions module can be connected to the balance via COM1 or COM2 port,
where COM1 connects THB 3/5, and COM 2 connects THB Y. In order to provide correct
cooperation enter connected module address and baud rate for the port (port settings) to
which the ambient conditions module is connected (the address and baud rate data is to be
found on an ambient conditions data plate).
Exemplary settings for ambient conditions module port:
Baud rate – 115200 bit/s; Address – 15.