RADWAG PM 10.C32, Руководство пользователя

Страница: 55 / 129

- 55 -
o
Using either or key, select the working mode that is to be operated (grey
field).
o
Press key to confirm
.
16.3. Working Mode Parameters
Each working mode has programmable parameters determining its functioning. For
overview of WEIGHING mode parameters, read section 9 of this user manual. Settings
related to remaining working modes are to be found in respective sections describing
particular working modes.
17. PARTS COUNTING
<Parts counting> is a working mode enabling you to determine quantity of small
pieces of the same mass, which determination is done on the basis of reference weight
value of single piece. The single piece weight value can be:
o
determined using a reference quantity of parts subjected to weighing,
o
taken from products database,
o
entered manually as a numeric value.
Procedure for activation of Parts Counting mode:
•
Select <Parts counting> mode, the home screen is displayed automatically, wherein
the top bar of the screen features pictogram.
Info field provides the following
information:
•
Net weight
•
Part mass
•
Product
•
Operator
•
Buttons: print header, print footer, set
part mass, determine part mass (using
reference quantity of parts), databases
17.1. Mode Related Settings
The supplementary settings enable you to adjust the working mode to your needs and
requirements. To access the settings follow the below procedure.
Procedure:
ACAI , Automatic Accuracy Correction, provides the following options: