RADWAG PM 10.C32, Руководство пользователя

Страница: 58 / 129

- 58 -
•
Single part mass must be equal or greater than 0.1 reading unit. Unless this
condition is met, the weighing device displays a message: <Single part mass too
low>.
17.5. Setting Reference Sample Mass by Acquiring Mass of a Single Part from
Database
Each product recorded in a database of products features set of information which allow to
identify it. Among the information there is weight value used during part counting process.
Procedure:
Enter <Parts counting> mode and press operation panel key to which pictogram (product
database) is assigned, next select given product from the list. <Parts counting> mode is
displayed, the weight value for a single piece is automatically acquired form the product
database.
Entering reference sample mass to weighing device memory
Procedure for entering the weight value of a single part to products database:
•
Press operation panel key to which pictogram (product database) is assigned.
•
Products database opens, press <Products> field.
•
Press key in order to select function < Fn > (active functions assigned to
1,2,3,4,5 keys are displayed in the bottom part of the display).
•
Press operation panel key to which pictogram (add product) is assigned.
•
Fill in the following fields (Name, Code, EAN, Mass – for Parts Counting mode it is
single piece weight).
•
Go back to <Parts counting> mode.
17.6. Parts Counting Procedure
First, it is necessary to obtain data about weight value of a single piece.
You can choose one of the following options:
−
Enter weight value for a single part (section 17.3), next put parts to be counted on
the weighing pan, parts quantity is displayed.
−
Determine weight value for a single part using reference sample mass of known
quantity (section 17.4). Next put parts to be counted on the weighing pan, parts
quantity is displayed. In the course of calculation, ACAI function pictogram is
visible < > (providing that the function is on).
−
Acquire weight value for a single part from the database (section 17.5). To do it,
you have to select respective product. Now put parts to be counted on the
weighing pan, parts quantity is displayed.