RADWAG PM 10.C32, Руководство пользователя

Страница: 12 / 129

- 12 -
3.2. Standard Delivery Components List
•
balance
•
standard weighing pan, open-work weighing pan – PM 10.C32 and PM 15.C32
models exclusively ,
•
power supply,
•
user manual - CD version.
3.3. Unpacking
Cut the adhesive tape. Take the device out of the packaging. Open the accessory box, take
the device components out of it. Put the weighing instrument in the place of use and install
the weighing pan, follow the below procedure.
Install the weighing pan 1 for PM with
d=0.01g or pan 2 for other PM model .
Make sure that the pan is installed
properly on the pan receivers: it cannot
touch the housing and must be stable.
Connect the indicator first (the connector
is to be found at the back of the balance
housing), next connect the supplementary
equipment.
Now, connect the weighing instrument to
the mains (the power supply socket is
located on the left side of the indicator).
3.4. Levelling
It is necessary to level the balance prior connecting it to the mains. To
level the balance turn its feet until the air bubble takes central
position. Make sure that all balance feet rest on the worktop surface
firmly.
After adjusting the balance level, use wrench (3) in order to
tighten bolt (2) of foot (1), the bolt must touch balance
housing. Keep tightening the bolt until it resists. With this
the foot will not unscrew in the course of operation. See
the figure on the left. Repeat this set of actions for the
remaining balance feet.