RADWAG PM 10.C32, Руководство пользователя

Страница: 109 / 129

- 109 -
UI Give accessible units
US Set unit
UG Give current unit
BP Activate sound signal
PC Send all implemented commands
BN Give balance type
FS Give max capacity
RV Give program version
A Set AUTOZERO function
EV Set ambient conditions state
EVG Give set ambient conditions state
FIS Set filter
FIG
Give current filter setting
ARS Set value release
ARG Give current value release setting
LDS Set last digit
LOGIN Operator logging
LOGOUT Operator logout
PROFILE Profile selection
PRG Give set profile name
NT Cooperation with PUE 7.1, PUE 10 indicator
Caution: Each command must end with CR LF characters.
33.2. Response Format
On receipt of a command, the indicator responds as follows:
XX_A CR LF command understood and in progress
XX_D CR LF command carried out (appears only after the XX_A command)
XX_I CR LF command understood but not accessible at this moment
XX _ ^ CR LF command understood but max threshold is exceeded
XX _ v CR LF command understood but min threshold is exceeded
XX _ OK CR LF command carried out
ES_CR LF command not recognised
XX _ E CR LF
time limit exceeded while waiting for stable measurement result
(time limit is a characteristic balance parameter)
XX
- name of a sent command
_ - space