Quest Engineering MPS 3, Руководство по эксплуатации

Страница: 53 / 268

MPS 3 System – System Installation
For installation of the MPS 3 Console on the HLM Pole, follow these steps:
1. Consult the HLM Operation Instructions prior to attempting to install the MPS 3
Console to ensure the console can be safely installed.
2. Once a placement location has been identified, clean and tidy the area and
install the MPS 3 Console Pole Mount Adapter per the instructions provided
with the accessory.
3. Using a Philips screwdriver, remove one of the feet on the MPS 3 Console and
replace it with the locking foot provided with the MPS 3 Pole Mount Adapter.
Choose a foot that will be in a convenient position for easy access once the
Console is installed. Remove the locking pin prior to attempting to place the
Console on the Pole Mount Adapter.
Figure 8: Remove Locking Foot from Pole Mount Adapter
4. Using ¼ ” Hex Driver, loosen the pole clamp screws (1/4 - 20) and place the
pole clamp over pole in the desired location. Reinsert the screws to secure the
pole clamp.
Figure 9: Secure Console Pole Mount
5. Ensure the MPS 3 Console Pole Mount Adapter is secure and the surface is
DRY, STABLE, AND LEVEL , prior to placing the MPS 3 Console.
11