Quest Engineering MPS 3, Руководство по эксплуатации, Страница: 192 / 268

MPS 3 System – Troubleshooting
11. Troubleshooting
This section provides a quick reference for responding to alarm conditions and error messages
and any subsequent troubleshooting that may be helpful to remedy certain situations.
11.1.General troubleshooting
Each MPS 3 System is rigorously tested prior to shipment to ensure the devices function
reliably as intended. It is expected that over the life of the device, some issues may arise as
a result of use conditions, environment, handling, and storage. Annual Preventative
Maintenance helps ensure that the MPS 3 System will function properly during use. Even
so, this troubleshooting guide may be helpful in working through minor issues to get the
system functioning properly.
11.2.MPS 3 Blood Bypass Tubing
The MPS 3 Blood Bypass Tubing ( REF 5301016) is only for use as a back-up with the MPS
3 System to continue fluid delivery in the event of complete battery depletion after AC power
failure or if the System becomes unusable even after following the corrective action and
troubleshooting suggestions in Sections 11.3 and 11.4. Follow the instructions for install and
use in the accompanying IFU with each Bypass Tubing (also found in Section 15.3 of this
Operations Manual).
Only Quest Medical Service personnel or trained technicians and
operators should attempt to troubleshoot the MPS 3 System. If this
troubleshooting guide does not remedy the situation please call
Quest Medical Technical Support at +1 (888) 510-7623.
DO NOT attempt to disassemble or dismantle the MPS 3 System
unless trained to do so. Doing so may void the product warranty.
1