Quest Engineering MPS 3, Руководство по эксплуатации, Страница: 102 / 268

MPS 3 System – Graphical User Interface (GUI) Overview
7.3.3.1.
Ischemic Timer
The Ischemic Timer gives the operator the ability to be notified when a set
period of non-delivery has elapsed. This notification is provided by an audible
tone and by flashing the timer display. There are two different timers that can
be set: The Initial Timer and the Repeat Timer.
To set the Ischemic Timer:
1. Select the Time display on the Home Screen and a delivery time setting
screen displays
Figure 55: Timer Settings
2. Use the Numeric keypad to set the Initial and Repeat timer values in
minutes. Use the On and Off buttons to turn the Ischemic Timer On or
Off.
3. The Initial and Repeat Timers shall have a range of 1 to 120 minutes in 1
minute intervals.
7.3.3.2. Manual Timer
1. Select the Start button and the stopwatch timer starts counting every
second from the current timer value to a maximum of 99 minutes and 59
seconds. Select the Stop button to stop the timer.
2. Select the Reset button to reset the timer to 00:00. If the timer is
counting when during the reset, timer continues counting after resetting
to 00:00.
12