Quest Engineering MPS 3, Руководство по эксплуатации, Страница: 112 / 268

MPS 3 System – Graphical User Interface (GUI) Overview
5. The Drain Hex button may be used at the end of the case to drain the water in
the heat exchanger to prevent dripping during removal. H2O Circ has to be
turned off to enable the Drain Hex button.
6. The H2O Prime button may be used to prime the H2O Circulation system. This
is needed to eliminate any air that might be trapped in the circulation system.
7. The Circ flow icon conveys the health of the water circulation flow. The
green icon is displayed when the water flow is healthy. A flashing gray icon is
displayed if the water flow is suboptimal.
7.4. Function Buttons
The Operator can select the following function buttons from the Home Screen.
•
Vent
•
ECG
•
Hold Volume
•
Graft
•
Menu
•
Protocol
•
Retro
•
Ante
•
Home
•
Auto
•
A dose may also be referred to as a delivery period.
•
A dose starts when the flow is initiated and dose ends when
the flow is stopped for more than programmable ‘off time
delay.’
•
If the flow is resumed before ‘off time delay’ the current dose
resumes.
•
A new dose starts when a delivery route is changed, a new
protocol is launched, Graft mode is activated or deactivated,
a Graft is labeled, or when an ECG event is recorded.
•
A dose always ends when Vent, Recirc, or Hold Vol mode is
activated.
22