Quest Engineering MPS 3, Руководство по эксплуатации, Страница: 35 / 268

MPS 3 System – Warnings and Cautions
•
Use only water to prime the water circulation system (except during the cleaning process
– Refer to Section 12.1 for more information).
o During warm delivery, small amounts of cold water are used to regulate temperature.
Therefore, the MPS 3 System must always be used with a cold water source.
o Transportation of the MPS 3 System is restricted. The MPS 3 console should be
drained prior to transport outside the operator facility. This prevents damage to
electronic components and protects the unit from damage due to freezing.
o When using a heater cooler unit, ensure water quality is maintained per heater cooler
manufacturer recommendations. DO NOT connect the MPS 3 Console to a heater
cooler unit that has not been properly disinfected per the manufacturer
recommendations.
o The long-term effectiveness of the MPS 3 circulation system disinfection procedures,
the supplemental use of hydrogen peroxide to inhibit bacterial growth in between
disinfection cycles, and the recommended interval for disinfection were evaluated in
the MPS 2 for up to 6 months. The disinfection and water maintenance procedures
mitigate but do not prevent biofilm formation.
o Water quality in the MPS 3 must be maintained per the recommendations in Section
12.1. DO NOT connect a heater cooler unit to the MPS 3 Console that has not been
properly disinfected per the recommendations in Section 12.1.3.
5