Operation
400-294-002
Rev. Date: 01/07
2-9
The handle has a START button and Velcro
®
-type straps, as shown in Figure 2-7.
The START button works just like
the one on the control dashboard. It
is placed on the handle so you don’t
have to reach across to the machine
to start an operation.
The Velcro
®
-type straps hold the
power cord up and away from the
moving parts of the machine and
help prevent it from dragging on the
lane as the machine moves down
and up the lane. It also relieves
stress on the power cord as it is
pulled when the machine moves.
The recommended power cord path is:
•
Bring the power cord under the handle.
•
Wrap the power cord around the left side of the handle and secure it with the
Velcro
®
-type strap.
•
Clip it into the eye hook located on the left side of the Express frame.
•
Plug it in.
This path keeps the cord away from the back sensor so that it doesn’t inadvertently set off
the sensor.
2.5 OPTICAL
SENSORS
The front and rear optical sensors determine whether the Express Lane Machine has
reached the back of the pin deck or the approach.
The front sensor is located on the
underside of the Express, as
shown in Figures 2-8a and 2-8b.
It is positioned so it “looks” down
on the lane. Information from this
sensor is used only when the
machine is traveling from the
approach to the pin deck (down
the lane). The sensor is
Figure 2-8b
Figure 2-8a
Figure 2-7
Содержание Express 294-115-200
