QubicaAMF Express 294-115-200, Инструкция по эксплуатации, техническому обслуживанию и запасным частям

Страница: 30 / 138

Express Lane Machine Operation, Maintenance, and Parts Manual
2-16 Rev. Date: 01/07 400-294-002
2.8.1 Filling And Preparing The Tanks
The tanks have been designed to allow you to clean, condition, and store the vacuumed
residue for at least 12 lanes. We recommend you fill the cleaner and oil tanks away from
the lane. However if you do fill them on the lanes, position the machine at least 2 feet
down the lane from the foul line to ensure you do not get cleaner or oil on the approach.
Complete the steps below to fill the cleaner and oil tanks and to prepare the waste tank.
2.8.1.1 Adding Cleaner
You cannot use just any cleaner in the Express Lane Machine or on your lanes. Listed
below are the things you need to keep in mind when filling the cleaner tank.
•
Use only cleaners that are manufactured for use on bowling lanes.
•
Follow the manufacturer’s directions to properly dilute the cleaner.
•
DO NOT put undiluted cleaner in the cleaner tank.
•
Do not overfill the tank.
Follow the steps below to fill the cleaning tank.
1. Remove the cap from the cleaner tank and set it aside.
2. Insert the large red funnel into the tank opening. Leave a small gap to allow air to
exit from the tank as you fill it.
3. Pour diluted ACC Cleaning Solution (or equivalent) into the tank until it is about an
inch below the tank inlet.
4. Remove the funnel.
5. Replace the cap.
6. Wipe up any drips or spills that may have occurred.
2.8.1.2 Adding Oil
As with the cleaner, there are things you must keep in mind when filing the oil tank.
•
Use only oil or lane dressing that is manufactured for use on bowling lanes.
•
Do not overfill the tank.
•
Pour in the oil slowly.
Avoid splashing the cleaner. Follow all instructions
and precautions on the product label. In case of
eye contact, flush with water for 15 minutes.