Maintenance
400-294-002
Rev. Date: 01/07
3-5
To measure the buffer brush pressure, perform the following steps. Perform these steps
with the machine in the
operating
position.
Tools Needed:
•
Phillips screwdriver
•
Pressure Adjustment Tool
Refer to Drawing Number:
•
294-115-053, View A
•
294-115-116
1.
Position the Express on a lane, about 2 feet down the lane from the foul line.
2.
Remove the two screws on both sides of the machine that attach the hood to the
frame, as shown in Figure 3-2, and lift off the hood. Set aside the screws.
3.
Locate the drive motor connector on the side of the control enclosure near the Vac
Head. The drive motor connector is the third connector from the left, as shown in
Figure 3-3.
Figure 3-2
Figure 3-3
Vacuum
Motor
Oil Transfer
Roller Motor
and
Cleaner Pump
Handle
Start Button
Oil / Buffer
Solenoid
Drive
Motor
Содержание Express 294-115-200
