Chapter 5 Troubleshooting
Diagnostic Tests from the Front Panel
Quantum SuperLoader 3A Series User’s Guide
73
Diagnostic Tests from the Front Panel
Diagnostic tests allow you to calibrate parts of the autoloader, check the
condition of parts, or test the autoloader’s functionality. From the front
panel, you can perform all of the diagnostic tests. Because certain tests
require you to manually insert a cartridge, you can perform only some of
the diagnostic tests using On-board Remote Management (see
On-board
Remote Management Diagnostic Tests
).
Setting the Security
5
When you enable the security function, the diagnostic tests are password
protected to ensure data integrity. To access any of the diagnostic tests,
you must first enter an
Administrator
password. If you do not enter the
password, you will be prompted to enter the password when you
attempt to perform a diagnostic test.
To enter an
Administrator
password:
1
From any menu, click the
Commands
heading. The
Commands
screen
displays.
2
On the
Command
submenu, scroll to
Enter Password
, and then press
Enter
.
3
On the
Enter Password
submenu, scroll to
Administrator
, and then
press
Enter
.
The
Login
screen displays with a row of asterisks. A text box displays
above the first asterisk.
4
In the text box, scroll to the first number of the password, and then
press
Enter
.
The text box above the asterisk disappears and another
text box displays above the next asterisk.
5
Repeat
step 4
to enter the remaining numbers of your password.
Note:
On-board Remote Management allows you to request all
diagnostic tests, but any tests that require a cartridge to be
inserted will time-out unless someone manually inserts the
cartridge at the appropriate time.
Note:
Press
Escape
to backspace to a previous text box, if
necessary.