Chapter 4 Customer Replaceable Units (CRUs)
Replacing a Magazine or Magazine Blank
Quantum SuperLoader 3A Series User’s Guide
50
Removing a Magazine
4
In most cases, you will remove a magazine by using the
Eject
command
on the front panel menu. If you need to remove the magazine when the
autoloader is powered off, you must remove it manually. Please contact
Customer Support for more information.
Removing a Magazine Using the Front Panel
4
1
On the menu, scroll to
Commands
.
2
Press
Enter
.
3
On the Commands submenu, scroll to
Eject
, and then press
Enter
.
4
On the Eject submenu, scroll to
Right Magazine
or
Left Magazine
,
depending on which magazine you want to eject, and then press
Enter
.
The magazine pops forward so that the front of the magazine is no
longer flush with the front panel.
5
With one hand, grasp the magazine by the handle and slide it
forward to remove. Place your other hand under the magazine to
support it and prevent it from falling.
Removing a Blank
4
Your autoloader comes equipped with either two magazines, or one
magazine and one magazine blank. The autoloader will not function
without both magazine bays equipped with either a magazine or a
magazine blank.
To remove a magazine blank:
1
Pull the magazine blank straight out.
2
Replace with another magazine blank or a cartridge magazine.
Installing a Magazine
4
To install a cartridge magazine:
1
Grasp the magazine by the handle with one hand and support it
underneath with the other hand.
