Chapter 2 Operating the Autoloader
Configuring the Autoloader
Quantum SuperLoader 3A Series User’s Guide
14
5
The next two digits represent the current month. At each position of
the month, use the up and down arrows to change the value of each
digit. Press
Enter
to advance the cursor to the next digit.
6
The next two digits represent the current day. At each position of the
day, use the up and down arrows to change the value of each digit.
Press
Enter
to advance the cursor to the next digit.
7
The next two digits represent the current hour. At each position of the
hour, use the up and down arrows to change the value of each digit.
Press
Enter
.
8
The last two digits represent the current minute. At each position of
the minute, use the up and down arrows to change the value of each
digit. Press
Enter
to advance the cursor to the next digit.
9
Press
Enter
to save.
10
Press
Escape
as necessary to return to the main menu.
Setting the Change Mode
2
The 3A Series autoloader uses
Random
mode only. The
Sequential
mode
is not supported.
In
Random
mode, you (or the backup software) can specify which
cartridge you want to use and where you want it to go.
Setting Security
2
You can add security to the front panel by password-protecting the
autoloader's functionality. The security setting only protects the front
panel functionality. The default setting is
Off
, meaning that no password
is required. However, you can enable the security option so that users
must enter a password to access functionality.
Security Option
2
When you first power on the autoloader, the security option is set to
Off
.
Use the following procedure to enable the security option. You must have
an administrator-level password to set passwords.
To set the security option:
1
From the main menu, scroll to
Configuration
, and then press
Enter
.
2
From the
Configuration
menu, scroll to
Security
. If a check mark
appears after the word, the security option is
On
. If no check mark
appears, the security option is
Off
.
