Chapter 3 On-board Remote Management
Configurations Page
Quantum SuperLoader 3A Series User’s Guide
39
3
In the
Day
field, type the current day of the month.
4
In the
Year
field, type the current year.
5
In the
Hour
text box, type the current hour in 24-hour format.
6
In the
Minute
text box, type the current minute.
7
Click
submit
to save the information.
Setting Network Options
3
When you originally installed the autoloader, you set the Ethernet
configurations through the front LCD panel. However, you can modify
them through On-board Remote Management. The options include
Current Network Parameters
,
Set IP
, and
Set Network Configuration
. To
change the Ethernet configurations:
To view the
Current Network Parameters
:
1
From any page, click the
Configuration
heading. The
Configuration
screen displays.
2
From the
Configuration
menu, click
Networking
.
The
Current Network Parameters
area displays the current IP address,
MAC address, and the speed setting for the Ethernet connection.
In the
Set IP
section, if a check mark appears in the box next to
DHCP
, the
dynamic IP address option is enabled. This means that with every reset of
the system, the IP address may change depending on the network
administrator's settings.
To
Set IP
address:
1
Clear the check box to remove the check mark from the
DHCP
field, if
applicable.
2
In the IP address fields, type the static IP address using the
<Tab>
key
to move from box to box.
3
If no check mark appears in the box next to
DHCP
, the static IP
address option is enabled. To change a static IP address, type in the
new address in the IP address fields using the
<Tab>
key to move
from box to box.
4
To change the IP address from a static address to a dynamic address,
click the box next to
DHCP
.
