Quantum SDLC 2.7, Руководство по установке

Страница: 93 / 152

Installation Guide 87
Step 9 (For upgrade from Scalar DLC ver. 2.1 only, otherwise skip this step.)
Resolve Port-Target assignment.
• Log on as ‘admin’. Above the main Management GUI the SCSI configuration pop-up screen
appears.
Figure 49 SCSI Configuration Screen
• Set the associations between Targets and Ports. Use the << button to associate Target with Target
port. Remember that the customer may have multiple SCSI Targets.
Each Target will have LUN 0; in case when a SCSI client exist for the target, the LUN 0 will be active
with a client assigned to it.
Figure 50 SCSI configuration: assign target(s) to port(s)
• After this is completed, click OK . A pop-up confirmation window opens.
Figure 51 Confirmation to Restart Scalar DLC
• Close the Scalar DLC Manager. Right-click on the three-penguin icon on the toolbar and select
‘Stop Scalar DLC’.
Note
The two-port adapters are shown in the Management GUI as two different single-port
adapters.