Quantum SDLC 2.7, Руководство по установке

Страница: 59 / 152

Installation Guide 53
Windows Service Pack
The SP4 for Windows 2000 operating system must be used with the Scalar DLC software. After the service
pack is installed, a restart is required. Then the system will configure the installed tools and services.
Disabling SYN Attack Detection Setting
If you are running Windows 2003 with SP1 or later, prior to initiating the installation of the SDLC 2.7
software, the system automatically performs a check of the Windows registry to determine if a parameter
for tuning the TCP/IP settings is enabled or disabled. This parameter handles firewall protection for SYN
attacks. To prevent MS SQL conflicts and Scalar DLC abnormal termination, it is recommended that you
disable the SYN attack detection setting.
After choosing Software > Scalar DLC > Install , you will be prompted to disable the detection parameters.
Figure 14 SYN Attack Detection Options
1 To disable the detection parameter, click Disable SYN attack detection . To continue without disabling
the detection parameter, click Cancel.
Note
Scalar DLC supports the Win2000 SP4 developed by the Microsoft. This service pack
can be used with all versions of Windows 2000 (Professional, Server, Advanced Server,
etc.).
The SP1 for Windows 2003 is required for the Scalar DLC but not included onto the
Scalar DLC Install CD. It must be installed with Windows 2003.
Note
If the parameter check starts on a Windows 2000, system, or a Windows system where
the detection setting is already disabled, the parameter check will silently exit and the
Scalar DLC installation will continue.