140
Advanced Setup Instructions
SCSI
Additional hardware requirements exist for the SCSI Clients based on either SCSI or Fibre Channel
connection.
Standard Solution
Figure 82
Standard solution: SCSI Client Connection
SCSI Requirements:
•
1 SCSI Target Adapter, as described in
Table 19
on page 115.
•
1 middle length (2-3 m) SCSI cable (68 pins) (client connection)
Be sure that the client connection scheme matches the example (see
Figure 82
). The SCSI target
adapter(s) on the Scalar DLC host must work in Target mode (see
Activating Target Mode
on page 121).
Note
Two-channel Adapters
on page 116 and
Disabling Library Medium Changer
on page 141.
Figure 83
Standard solution: Fibre Channel Client Connection
FC Requirements:
•
1 FC Target Adapter, as described in
Table 19
on page 115.
•
FC switch
•
1 FC cable (client connection)
Be sure that the client connection scheme matches the example (see
Figure 83
). The FC target adapter(s)
on the Scalar DLC host must work in Target mode, but not failover (see
Activating Target Mode
on page
121).
Note
Two-channel Adapters
on page 116 and
Disabling Library Medium Changer
on page 141.
Note
If two or more SCSI/FC Target Adapters are used, additional cables are required. All
adapters used in Target mode must match
Table 19
on page 115 and also must be
activated as Targets, as described in
Activating Target Mode
on page 121.
Содержание SDLC 2.7
