Quantum SDLC 2.7, Руководство по установке

Страница: 51 / 152

Installation Guide 45
Configuring Cluster Service
Windows 2000 Advanced Server and Windows 2003 Server require completely different procedures.
Windows 2000
Step 1 Power up Node1 and log in as Administrator to SDLC1 (this computer)
Step 2 Configure Cluster Service on Node1
• Select Start > Settings > Control panel > Add/Remove Programs > Add/Remove Windows
Components >> Cluster Service . Press Next .
• Insert Windows 2000 Advanced Server SP4 CD and press OK. Cluster Service Configuration
Wizard will start. Press “Next”.
• Click “I Understand” and “Next”.
• Select “The First Node in the Cluster” and “Next”.
• Set cluster name to SDLCCLUSTER and “Next”.
• Set User Name and Password (“administrator” and “password”). Set Domain to “sdlcdomain”
and “Next”.
• Ensure that “R: Cluster Raid” is in managed disks and “Next”
• Select “R: Cluster Raid” and “Next” and “Next”.
• Set up Cluster Network
• For Network Name “public” select “Enable this Network for Cluster Use”.
• Select “All Communications (mixed network)” and “Next”.
• For Network Name “private” select “Enable this network for cluster use”.
• Select “Internal Cluster Communications Only (Private Network)” and “Next”.
• Ensure that “private is at the top of Networks list and “Next”
• Set “Cluster IP address” to <ip address> (192.168.0.222 in lab)
• Set “Subnet Mask” to 255.255.255.0
• Set “Network” to “public” and “Next”.
• “Finish” and “OK” to Cluster Service Started Successfully.
• Finish and eject CD and close all windows and shutdown Node1
Step 3 Power up Node2 and log in as Administrator for SDLC2 (this computer)
Step 4 Configure Cluster Service on Node2.
• Select Start > Settings > Control panel > Add/Remove Programs > Add/Remove Windows
Components >> Cluster Service . Press Next .
• Insert Windows 2000 Advanced Server SP4 CD and press OK.
• Power on Node1 and wait for <ctrl><alt><del> (log in) screen.
CAUTION
The cluster name must not be longer than 14 symbols.