Quantum SDLC 2.7, Руководство по установке

Страница: 33 / 152

Installation Guide 27
• (on Windows 2000) Open “Network Identification” and select “Properties”.
• (on Windows 2003) Open Computer Name > Change > More. Ensure that the checkbox
‘Change primary DNS suffix when domain membership changes’ is
enabled (see Figure
11 ). Press OK.
Figure 9 Windows 2003: DNS suffix enabled
• Set “Computer name” (sdlc1 for Node1 and sdlc2 for Node2)
• Select “Domain” and enter <domain name without postfix> and OK (“domain” for the computers
in lab)
• Enter domain user name and password and OK (“adicuser” and “pa$$w0rd”)
• Wait for Welcome to domain .
• Press “OK” and “OK” to reboot and “OK” and “Yes”.
Step 7 ‘Yes’ to reboot now. Wait until reboot.
Step 8 Repeat steps 1 to 6 for Node2. ‘No’ to reboot now.
Step 9 Shutdown both nodes.
CAUTION
Both Node1 and Node2 names must not be longer than 14 symbols.
CAUTION
Using Start > Run do the following:
From Node2 run: ping <Node1 public IP address>
From Node2 run: ping <Node1 private IP address>
From Node1 run: ping <Node2 public IP address>
From Node1 run: ping <Node2 private IP address>
From Node1 or Node2 run: ping <Domain name>
If any of these commands returns “Request timed out“ response, that means
the network settings are configured incorrectly, for example, the network
connection that has been configured as ‘public’, is in fact internal cluster
(private) network connection.