manualshive.com logo in svg

Quantum SDLC 2.7, Руководство по установке

Поделиться
Скачать
Quantum SDLC 2.7 Скачать руководство пользователя страница 41

Installation Guide

35

•

Install. Cancel License wizard.

•

Unselect “Read Installation Summary Now” and “Finish”.

•

Remove Scalar DLC Install CD. “Yes” to restart Node2. Wait for <ctrl><alt><del> screen

Step 6

Install Target Drivers (optional, only for SCSI/FC clients with Scalar DLC. If no SCSI/FC Client 
will be used with the Scalar DLC software, proceed to Step 7)

•

Insert Scalar DLC install CD in Node1. Autorun will start.

•

Follow the installation sequence for 

Installing the SCSI/FC Target Drivers

 on page 74.

•

Remove CD and reboot Node1.

•

Insert Scalar DLC install CD in Node2. Autorun will start.

•

Follow the installation sequence for 

Installing the SCSI/FC Target Drivers

 on page 74.

•

Remove CD and reboot Node2.

•

On Node1 enable Target mode for the adapter, see 

Activating Target Mode

 on page 77. Then 

reboot Node1.

•

On Node2 enable Target mode for the adapter, see 

Activating Target Mode

 on page 77. Then 

reboot Node2.

Step 7

Set Scalar DLC to Failover (cluster) mode

•

Log in as the domain user with local admin rights.

•

Insert Scalar DLC Install CD. Close Autorun. Run

 

<CD>:\Scalar_DLC\Cluster\SDLC_ClusterConfig.exe

•

Verify that both nodes show as up in the SDLC Cluster Configurator.

•

Click Make SDLC Cluster Configuration.

•

“OK” when complete and close all windows.

•

Reboot Node1 and Node2.

Configuring the Logical Library

Step 1

Using any node, log in as administrator or as a domain user with the local administration rights 
and start the Scalar DLC software if it is not started automatically.

Step 2

Double click the 

Scalar DLC Manager

 icon to start the Scalar DLC Management GUI from a 

local computer. From a remote computer, use

 

http://ScalarDLC-machine-name

 in current browser.

Step 3

The first start of the Scalar DLC Management GUI launches the configuration engine. Select 
either the Automatic or Manual option to configure the logical library automatically, or Advanced 
option in case of more then one logical library should be created. Refer to the 

Configuration

 

chapter of the

 Scalar DLC Reference Guide

 for further instructions.

Note

It is strongly recommended to use the virtual Cluster name here (for example,

 

SDLC-CLUSTER).

Содержание SDLC 2.7

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды